The large diameter with big filter area insures to reduce the number of filter cartridges and the dimention of housing required..The long service life and high flowrate result in low investment and less manpowert in many applications

-- Gradient pore structure

--Up to 110M3/H flowrate per filter cartridge for water filtration.

--Maximum 50% reduction of filter system

--20.69 inch /525mm,40.69inch/1033mm and 60.69 inch/1541mm lengths are available

--All contaminants can be removed within the cartridge because of the flow direction.

Technical  Specifications

Materials of Components
--Filter media: Pleated  glass fiber:Pleated depth Polypropylene(PP),or Melt blown PP
--Support/Drainage: Polypropylene(PP)
--End caps:Glass fiber reinforced Polypropylene
--O-ring seal:EPDM, NBR

Removal Ratings 

1um, 4.5um, 6um, 10um,20um,40um,70um,100um

Dimentions

   Outside Diameter: 6 inch(152mm)
   Length:  20.69 inch(525mm)
                  40.69 inch(1033mm)
                  60.69 inch(1541mm)
Operating Conditions

--Maximum Operating Temperature:
Pleated glass fiber:121C;
Pleated PP: 82C;
Melt Blown PP: 65C
--Maximum Differential Pressure: Pleated glass fiber:3.4bar at 121C
Pleated PP: 3.4Bar at 82C;
Melt Blown:1.03Bar at 65C
--Recommended Change out Differential Pressure:2.4Bar at 20C.
--Suggested maximum Flow of water: 20.69 inch length:660LPM;
  40.69 inch length:1,300LPM;

 60.69 inch length:1,900LPM.

Appications

 --Prefiltration of RO,Pretreatment of sea water desalination
 --Condensate water filtration,hot water recovery in power generation
 -API, solvents,and water filtration in BioPharm market
--The filtration of bottled water, high Fructose,edible oil,soft drinks,and milk

 --Paints and coatings,Petrochemical,Refineries
 --Microelectronics,film,fiber and resin